Products

产品中心

SHENZHEN CITY XINYUAN LIJING TECHNOLOGY CO.LTD.
Contact: Ms.Zhang   Ms.Luo
Zipcode: 518100
  Phone:0086+ 755-27463209
              0086+755-81491397
      Fax:0086+755-61673089
      QQ:2851883300 (Ms.zhang)
      QQ:2851883295 (Ms.Zhang)
     Add: Baoan District City, Songgang, Shenzhen,Langhui street,8

Multi axis automatic locking screw machine

You are here：Home >> Products >> Automatic locki... >> Multi axis auto...

Name：Vertical (inflatable) 8 axis automatic locking screw machine

Model：B081

Category：Multi axis automatic locking screw machine

Product Features：
Multi-axis automatic lock screw machine operating procedures than the hand-held lock screw machine to more, because of its high degree of automation, the function is more than hand-held lock screws. Operation is not complicated, here as long as the introduction of Chi-speed dual-axis automatic lock Screw machine operation steps, Xinyuan force multi-axis fixed automatic lock screw machine can use this method.

Description Parameter

Xinyuan Lijin technology Co.,Ltd equipment vertical (inflatable) 8-axis automatic lock screw machine is made according to the customers product, this machine is mainly used in the electrical appliances, electronics, toys, lamps and so many industries, welcome to visit and order!

一. Vertical (inflatable) 8-axis automatic lock screw machine details:

1. High efficiency, more than the electric screwdriver at the same time, can replace more than workers. The number of batches can be customized according to customer requirements;

2. Easy to operate, the traditional manual screw and alignment screw holes need to take up a lot of work time and energy, and equipment only need to place the workpiece can be kept;

3. Intelligent, PLC intelligent circuit control, configuration touch screen, production data at a glance;

4. High standards, lock the process completely by the equipment according to the program to complete their own, to avoid the adverse effects of manual misuse;

5. Stable performance, the key parts of the use of high-quality metal materials and through special treatment, the original electronic devices imported, to ensure that equipment zero failure.

二. Vertical (inflatable) 8-axis automatic lock screw machine advantages:

Provincial cost: single can be efficient operation, one is equivalent to the efficiency of 3-5 people;

High efficiency: multi-axis lock at the same time, screw a good number of screws and screw a screw the same time required;

More relaxed: a single device required workers 1, just complete the loading and unloading;

Can be customized: equipment in strict accordance with customer products, screws and production requirements to be customized, better use;

Good image: intelligent automation equipment so that the production of a new scene, establish a high-tech corporate image.

三. Vertical (inflatable) 8-axis automatic lock screw machine requirements:

1. Applicable to all types of screws, the total length of the screw should be greater than 1.3 times the diameter of the nut;

2. The total length of the screw is not more than 40MM, the screw can bring the movable gasket;

四. Vertical (inflatable) 8-axis automatic lock screw machine use:

1. Turn on the power, connect the air supply;

2. Screw the screw into the screw silo, the amount of screws to not exceed the height of the screw conveyor is appropriate;

3. Place the product to be locked, start the host switch, the device automatically screw all the screws;

4. Can set the automatic mode, the operator can only take the workpiece can be;

5. Replace the product according to the screw hole position to adjust the position of the shaft and replace the corresponding fixture.

五. Vertical (inflatable) 8-axis automatic lock screw machine application scope:

一.Vertical (inflatable) 8-axis automatic lock screw machine data：

	Product‘s name	Vertical (inflatable) 8-axis automatic lock screw machine
	Model	B081
	Brand	Xinyuan Lijin
	Origin	Shenzhen
	Whether the non-standard custom	Yes
	Warranty	1 year

二.Vertical (inflatable) 8-axis automatic lock screw machine data：

Name	Data
Current	110v-220v
Power	600w
Frame	steel table,sheet metal frame
Number of batches	8（According to the situation matching）
Screw feeder quantity	2 units（According to the situation matching）
Speed	8 pieces / second
Connect mode	Universal joint
Control mode	Manual or pedal
Program storage method	PLC
Operation method	HMI
Product use range	according to customer requirements
Horizontal adjustment range	±30mm的调节量
Vertical adjustment range	±15mm
Screw locking depth	30mm Can be produced as required
Min.screw pitch	20mm
Electric screwdriver torque detection	Yes
Screw slider, leak lock, leak detection	Yes
Alarm	the warning flashes and the buzzer whistles
Weight	250kg

Products

Ultrasonic welding machin...

Automatic soldering machi...

Automatic locking screw m...

Automatic dispensing mach...

Servo press

Butterfly mask nose beam ...

About Us

Products

News

Recruitment

Contact Us