News

资讯中心

SHENZHEN CITY XINYUAN LIJING TECHNOLOGY CO.LTD.
Contact: Ms.Zhang   Ms.Luo
Zipcode: 518100
  Phone:0086+ 755-27463209
              0086+755-81491397
      Fax:0086+755-61673089
      QQ:2851883300 (Ms.zhang)
      QQ:2851883295 (Ms.Zhang)
     Add: Baoan District City, Songgang, Shenzhen,Langhui street,8

News

You are here：Home >> News

Blowing type automatic locking screw machine and adsorption type automatic locking screw machine difference

Publish：SHENZHEN CITY XINYUAN LIJING TECHNOLOGY CO.LTD. Time：2016-04-02

Shenzhen Xinyuan LijinTechnology Co., Ltd. specializing in the production of automatic glue machine, automatic soldering machine, automatic lock screw machine, good quality, excellent performance, welcome to come to order!
Adsorption automatic screw machine
Working principle: the adsorption automatic screw machine type coordinate measuring machine by a screw arrangement and the coordinate machine combined with that program the special automatic locking screw machine controller MCU, arranging machine to send the screws at the same time, the coordinate machine screws and need to repeatedly draw screw.
Adsorption automatic screw machine type coordinate machine
advantage：
1 low cost, adsorption automatic screw machine by the combination of two independent institutions, the development of these two independent agencies are very mature industry, the cost is relatively low;
2 in a limited range can be achieved between several different screws, using the arrangement machine feeding, the arrangement of the machine can be used in a limited range of regulation.
Insufficient:
Efficiency is low, the repeated use of screws to spend a lot of time, the use of limitations.
Feed screw can only use in the M1-M3 between the 1 arrangement machine, for slightly bigger screws, not stable feeding;
2 bin is small, the need for frequent screw;
3. Can only be used to print products common screw lock pay, due to the adoption of automatic screw machine type adsorption, for curved surface, not rules on the surface of the screw holes of products cannot run steadily, especially for some special screw, long screws, screws, etc. cannot run steadily.
Applicable scope:
Luo Si type adsorption automatic machine coordinate machine is suitable for small Luo Si (M3 Luo Si, within the best) use flat products, can be adjusted in the scope of feeding Luo Si, applicable to a variety of Luo Si.
Blowing type automatic locking screw machine:
Working principle: by automatic nail feeding machine after selection, arrangement, detection, the screw conveyor to coordinate machine lock mouth, by the coordinate machine according to set program lock screw, PLC control, transportation, locking screws at the same time, boot can not stop lock pay.
Blowing type coordinate measuring machine
advantage：
1. High efficiency, due to the blowing type feeding and locking mechanism is one of the, save time to fetch the screw, the device only needs to in accordance with the procedures and of each screw hole of the screw can be, configuration of double electric group, a and unscrew 2 screws and higher efficiency.
2 for a wide range of products, the products surface and deep holes, screws, screws, countersunk stable locking. Can set lock scheme according to the demand, suitable for different product models of enterprise.
3 for a wider range of screw and torque requirements, larger screw products.
Insufficient:
Blowing type automatic locking screw machine according to the product characteristics of screw design, screw to ensure the stable operation of large differences.
Applicable scope:
Suitable for type variety, production requirements, production strict standards.
Above advantages, disadvantages and the application range is only adsorbed on the automatic screw machine and air blowing type between the two contrast, usually case we suggest choose automatic inflatable lock screw machine, after all production efficiency and stability is the artificial Province, the stripping efficiency of the premise.

Previous：What is the difference between a dispenser and a potting machine? What are their characteristics? 2021/12/27
Next： Xinyuan Lijin adsorption refrigeration and air blowing type locking efficiency and scope 2016/04/02

Back

News

Industry News

Company news

The latest news

FAQ

About Us

Products

News

Recruitment

Contact Us