News

资讯中心

SHENZHEN CITY XINYUAN LIJING TECHNOLOGY CO.LTD.
Contact: Ms.Zhang   Ms.Luo
Zipcode: 518100
  Phone:0086+ 755-27463209
              0086+755-81491397
      Fax:0086+755-61673089
      QQ:2851883300 (Ms.zhang)
      QQ:2851883295 (Ms.Zhang)
     Add: Baoan District City, Songgang, Shenzhen,Langhui street,8

The latest news

You are here：Home >> News >> The latest news

Guide for the operation of multi axis automatic screw machine

Publish：SHENZHEN CITY XINYUAN LIJING TECHNOLOGY CO.LTD. Time：2016-03-18

Automatic multi axis screw machine operating procedures than hand-held automatic screwing confidential much, due to its high degree of automation function is also than hand-held lock screw to. The operation is not complicated, here as long as the introduction of the Chi speed biaxial type automatic screw machine screw operation steps, Chi speed multi axis fixed type automatic screw machine can be used in this method.
Multi axis automatic screw machine
1 automatic feeding
2 incoming inspection
3 missing alarm
4 intelligent counting
5 automatic manual swap
6 automatic lock
Multi axis automatic screw machine operating instructions
Automatic screw machine operation
Automatic screw machine operation
1 switch on the power source, air source;
2 turn on the power button, the automatic manual button to automatically,
The 3 placed products to lock position,
4 at the same time according to the manual start button on both sides,
5 remove the locking good product,
6, repeat steps 3.4.5.
If you need to stop, start and stop button.
Such as hear the alarm that the hopper screw has been used to start and stop button, open the top cover feeding, screw machine can be put into the corresponding specification.
Automatic screwing machine manual function
Automatic screw machine operation
In the daily production, the use of chisu automatic screwing machine can be started automatically to complete the screw lock, manual function is mainly used in the commissioning period, most of the products in the lock screw locking screws, will be used to clamp, fixed position of the product, improve the efficiency of lock normally. This work is done by me company to complete. If the client does not need to make our products self debugging fixtures, manual operation is not complicated,
1 automatic manual manual;
2 place the fixture with the product, start a manual button down;
The 3 batch of debugging fixture and electric position, ensure product and screw holes on the electric clamp anastomosis.
4 manual start up;
5 repeated tests, until an accurate positioning.
We can determine a good fixture position will auto manual button to automatically, can be used in daily production.
Daily maintenance of multi spindle automatic screw machine
1 keep clean, when not in use, as far as possible the use of oil cloth, less water
Scrap and other tools do not stay 2
3 keep ventilated, dry
4 regular plug ventilation, check the performance
5 often check, rodent tracheal wire, use of the future
Because of its intelligent structure and precision, have any questions or need to repair, please contact us, do not disassemble.

Previous： the Xinyuan Lijin automatic soldering machine features 2016/03/31
Next：Automatic locking screw machine and hand lock screw machine comparison 2016/03/18

Back

News

Industry News

Company news

The latest news

FAQ

About Us

Products

News

Recruitment

Contact Us