No matter what equipment, as long as you want to achieve more efficient results in production, then when debugging the equipment, you need to adjust the parts and parameters of the equipment to an excellent state. During the operation of the automatic dispenser, adjusting the performance also has a great impact on its use. When connecting the excellent automatic dispenser, you need to The following two points need to be noted.
.jpg)
1. Installation of power cable connecting line and air valve
The obvious advantage of automatic dispenser is that it can significantly reduce the human expenditure of enterprises, and greatly improve the work efficiency and accuracy. Just to realize this advantage, when the automatic dispenser is connected, it is necessary to install the air valve and power cable in strict accordance with the standard. Generally, the requirement for installing the air valve and power cable connecting line of the automatic dispenser is to connect the foot controller port of the dispenser to the syringe through the air pipe when connecting the air valve, and connect the air valve of the syringe to the controller of the automatic dispenser, and connect the cable between the automatic dispenser and the controller through this step.
.jpg)
2. The syringe should be put into the holder and fixed in parallel
Excellent performance of the automatic dispenser, businesses introduce dispenser in the use of the process must use the appropriate glue, and if the use of AB glue, then you need to a glue and B glue respectively from the pressure barrel connected to the glue gun mirror inlet, at the same time, the length of the mixing tube should meet the requirements, only need to control the pressure bar can cut off the flow of glue. When installing the syringe, it must be placed behind the gripper and fixed to ensure that the dispensing position can be well fixed when the automatic dispensing machine is running.
.png)
Excellent performance of the automatic dispenser in the connection, if there is any problem, it will directly cause the equipment operation is not smooth, or the dispenser can not accurately dispensing, so it is recommended that in the connection of the popular automatic dispenser, despise the fixed position of the needle barrel and the air valve, the installation of the connector in accordance with the instructions and the guidance of the instructor, so as to ensure the safety It can ensure the accurate operation of the automatic dispensing machine with good performance.
